TWCONFIG(4) TWCONFIG(4) NAME twconfig - Tripwire configuration file reference DESCRIPTION The configuration file stores system-specific information, including the location of Tripwire data files, and the settings used to send email notification. The configuration file settings are generated dur- ing the installation process, but can be changed by the system adminis- trator at any time. The configuration file is signed with the site key, and the site passphrase is required to edit the file. During installation, a signed Tripwire configuration file tw.cfg will be created in the /etc/tripwire directory, and a plain text copy of this configuration file twcfg.txt will be created in the same direc- tory. The configuration file is modified using the twadmin --create-cfgfile command. With this command, the user can designate an existing plain text file as the current configuration file. Using the current site key and passphrase, the new configuration file is cryptographically signed and saved with this command. Components of the Configuration File The Tripwire configuration file is structured as a list of keyword- value pairs, and may also contain comments and variable definitions. Any lines with "#" in the first column are treated as comments. The general syntax for variable definition is: keyword = value For example: ROOT = /usr/tripwire EDITOR = /usr/local/bin/jove Variable substitution on the right hand side is permitted using the syntax: $( varname ) For example: DBFILE = $(ROOT)/db/$(HOSTNAME).twd Variable names are case-sensitive, and may contain all alphanumeric characters, underscores, the characters "+-@:", and the period. Two variables are predefined in the configuration file, and may not be changed. HOSTNAME is the unqualified hostname that Tripwire is running on, and DATE is a string representation of the date and time. Required Variables The following variables must be set in order for Tripwire to operate. The values listed below are assigned during installation. POLFILE Default = /etc/tripwire/tw.pol DBFILE Default = /var/lib/tripwire/$(HOSTNAME).twd REPORTFILE Default = /var/lib/tripwire/report/$(HOSTNAME)-$(DATE).twr SITEKEYFILE Default = /etc/tripwire/site.key LOCALKEYFILE Default = /etc/tripwire/$(HOSTNAME)-local.key Other Variables The following variables are not required to run Tripwire, but some of the program's functionality will be lost without them. The values assigned during installation are listed. EDITOR Specifies an editor to be used in interactive modes. If EDITOR is not defined, and no editor is specified on the command line, using interactive modes will cause an error. Initial value: /bin/vi TEMPDIRECTORY This variable can be set to the location to which tripwire should write its temporary files. By default it is /tmp, which due to the default permissions can be very insecure. It is rec- ommended that you use this configuration variable to provide tripwire with a secure place to write temporary files. The directory used should have its permissions set such that only the owning process can read/write to it, i.e. "chmod 700". Initial value: /tmp GLOBALEMAIL This variable is set to a list of email addresses separated by either a comma ",", or semi-colon ";". If a report would have normally been sent out, it will also be send to this list of recipients. Initial value: none LATEPROMPTING Prompt for passphrase as late as possible to minimize the amount of time that the passphrase is stored in memory. If the value is true (case-sensitive), then late prompting is turned on. With any other value, or if the variable is removed from the configuration file, late prompting is turned off. Initial value: false LOOSEDIRECTORYCHECKING When a file is added or removed from a directory, Tripwire reports both the changes to the file itself, and the modifica- tion to the directory (size, num links, etc.). This can create redundant entries in Tripwire reports. With loose directory checking, Tripwire will not check directories for any properties that would change when a file was added or deleted. This includes: size, number of links, access time, change time, modi- fication time, number of blocks, growing file, and all hashes. If the value for this variable is true (case-sensitive), then loose directory checking is turned on, and these properties will be ignored for all directories. With any other value, or if the variable is removed from the configuration file, loose directory checking is turned off. Turning loose directory checking on is equivalent to appending the following propertymask to the rules for all directory inodes: -snacmblCMSH Initial value: false SYSLOGREPORTING If this variable is set to true, messages are sent to the syslog for four events: database initialization, integrity check com- pletions, database updates, and policy updates. The syslog mes- sages are sent from the "user" facility at the "notice" level. For more information, see the syslogd(1) man page and the sys- log.conf file. The following illustrates the information logged in the syslog for each of the four events: Jun 18 14:09:42 lighthouse tripwire: Database initialized: /var/lib/tripwire/test.twd Jun 18 14:10:57 lighthouse tripwire: Integrity Check Complete: TWReport lighthouse 20000618141057 V:2 S:90 A:1 R:0 C:1 Jun 18 14:11:19 lighthouse tripwire: Database Update Complete: /var/lib/tripwire/test.twd Jun 18 14:18:26 lighthouse tripwire: Policy Update Complete: /var/lib/tripwire/test.twd The letters in the Integrity Checking log correspond to # of violations, maximum severity level, and # of files added, deleted, and changed, respectively. With any value other than true, or if this variable is removed from the configuration file, syslog reporting will be turned off. Initial value: true REPORTLEVEL Specifies the default level of report produced by the twprint --print-report mode. Valid values for this option are 0 to 4. The report level specified by this option can be overridden with the (-t or --report-level) option on the command line. If this variable is not included in the configuration file, the default report level is 3. Note that only reports printed using the twprint --print-report mode are affected by this parameter; reports displayed by other modes and other commands are not affected. Initial value: 3 Email Notification Variables MAILMETHOD Specifies the protocol to be used by Tripwire for email notifi- cation. The only acceptable values for this field are SMTP or SENDMAIL. Any other value will produce an error message. Initial value: SENDMAIL SMTPHOST Specifies the domain name or IP address of the SMTP server used for email notification. Ignored unless MAILMETHOD is set to SMTP. Initial value: mail.domain.com SMTPPORT Specifies the port number used with SMTP. Ignored unless MAIL- METHOD is set to SMTP. Initial value: 25 MAILPROGRAM Specifies the program used for email reporting of rule viola- tions if MAILMETHOD is set to SENDMAIL. The program must take an RFC822 style mail header, and recipients will be listed in the "To:" field of the mail header. Some mail programs inter- pret a line consisting of only a single period character to mean end-of-input, and all text after that is ignored. Since there is a small possibility that a Tripwire report would contain such a line, the mail program specified must be able to ignore lines that consist of a single period (the -oi option to sendmail pro- duces this behavior). Initial value: /usr/lib/sendmail -oi -t EMAILREPORTLEVEL Specifies the default level of report produced by the tripwire --check mode email report. Valid values for this option are 0 to 4. The report level specified by this option can be overrid- den with the (-t or --email-report-level) option on the command- line. If this variable is not included in the configuration file, the default report level is 3. Initial value: 3 MAILNOVIOLATIONS This option controls the way that Tripwire sends email notifica- tion if no rule violations are found during an integrity check. If MAILNOVIOLATIONS is set to false and no violations are found, Tripwire will not send a report. With any other value, or if the variable is removed from the configuration file, Tripwire will send an email message stating that no violations were found. Mailing reports of no violations allows an administrator to dis- tinguish between unattended integrity checks that are failing to run and integrity checks that are running but are not finding any violations. However, mailing no violations reports will increase the amount of data that must be processed. Initial value: true VERSION INFORMATION This man page describes Tripwire 2.4.1. AUTHORS Tripwire, Inc. COPYING PERMISSIONS Permission is granted to make and distribute verbatim copies of this man page provided the copyright notice and this permission notice are preserved on all copies. Permission is granted to copy and distribute modified versions of this man page under the conditions for verbatim copying, provided that the entire resulting derived work is distributed under the terms of a per- mission notice identical to this one. Permission is granted to copy and distribute translations of this man page into another language, under the above conditions for modified versions, except that this permission notice may be stated in a trans- lation approved by Tripwire, Inc. Copyright 2000 Tripwire, Inc. Tripwire is a registered trademark of Tripwire, Inc. in the United States and other countries. All rights reserved. SEE ALSO twintro(8), tripwire(8), twadmin(8), twprint(8), siggen(8), twpol- icy(4), twfiles(5), sendmail(1), vi(1), syslogd(1) 1 July 2000 TWCONFIG(4)
Generated by dwww version 1.11.3 on Mon May 20 23:25:31 CEST 2013.